Removal of organic toxic chemicals using the spent mushroom compost of Ganoderma lucidum

The removal of the organic toxic chemicals di-n-butyl phthalate (DBP), di-2-ethyl hexyl phthalate (DEHP), nonylphenol (NP), and bisphenol-A (BPA) by laccase obtained from the spent mushroom compost (SMC) of the white rot fungi, Ganoderma lucidum, was investigated. The optimal conditions for the extraction of laccase from SMC required using sodium acetate buffer (pH 5.0, solid : solution ratio 1 : 5), and extraction over 3 h at 4 °C. The removal of NP was enhanced by adding CuSO(4) (1 mM), MnSO(4) (0.5 mM), tartaric acid (20 mM), 2,2'-azino-bis-(3-ethylbenzothiazoline-6-sulfonic acid) (ABTS; 1 mM), and 1-hydroxybenzotriazole (HBT; 20 mg L(-1)), with ABTS yielding a higher NP removal efficiency than the other additives. At a concentration of 2 mg L(-1), DBP, DEHP, NP, and BPA were almost entirely removed by laccase after incubation for 1 day. The removal efficiencies, in descending order of magnitude, were DBP > BPA > NP > DEHP. We believe that these findings could provide useful information for improving the efficiency of the removal of organic toxic chemicals in the environment.     

Combining a finite mixture distribution model with indicator kriging to delineate and map the spatial patterns of soil heavy metal pollution in Chunghua County, central Taiwan

This study identifies the natural background, anthropogenic background and distribution of contamination caused by heavy metal pollutants in soil in Chunghua County of central Taiwan by using a finite mixture distribution model (FMDM). The probabilities of contaminated area distribution are mapped using single-variable indicator kriging and multiple-variable indicator kriging (MVIK) with the FMDM cut-off values and regulation thresholds for heavy metals. FMDM results indicate that Cr, Cu, Ni and Zn can be individually fitted by a mixture model representing the background and contamination distributions of the four metals in soil. The FMDM cut-off values for contamination caused by the metals are close to the regulation thresholds, except for the cut-off value of Zn. The receiver operating characteristic (ROC) curve validates that indicator kriging and MVIK with FMDM cut-off values can reliably delineate heavy metals contamination, particularly for areas lacking background information and high heavy metal concentrations in soil.     

Determination of antibiotics in sewage from hospitals, nursery and slaughter house, wastewater treatment plant and source water in Chongqing region of Three Gorge Reservoir in China

Sewage samples from 4 hospitals, 1 nursery, 1 slaughter house, 1 wastewater treatment plant and 5 source water samples of Chongqing region of Three Gorge Reservoir were analyzed for macrolide, lincosamide, trimethoprim, fluorouinolone, sulfonamide and tetracycline antibiotics by online solid-phase extraction and liquid chromatography-tandem mass spectrometry. Results showed that the concentration of ofloxacin (OFX) in hospital was the highest among all water environments ranged from 1.660 μg/L to 4.240 μg/L and norfloxacin (NOR, 0.136-1.620 μg/L), ciproflaxacin (CIP, ranged from 0.011 μg/L to 0.136 μg/L), trimethoprim (TMP, 0.061-0.174 μg/L) were commonly detected. Removal range of antibiotics in the wastewater treatment plant was 18-100% and the removal ratio of tylosin, oxytetracycline and tetracycline were 100%. Relatively higher removal efficiencies were observed for tylosin (TYL), oxytetracycline (OXY) and tetracycline (TET)(100%), while lower removal efficiencies were observed for Trimethoprim (TMP, 1%), Epi-iso-chlorotetracycline (EICIC, 18%) and Erythromycin-H₂O (ERY-H₂O, 24%). Antibiotics were removed more efficiently in primary treatment compared with those in secondary treatment.     

活性炭电极对溶液中NaCl的电吸附行为

用活性炭、酚醛树脂和乌洛托品制备了活性炭电极。利用扫描电子显微镜(SEM)、傅立叶变换红外光谱仪(FTIR)分析了电极的表面性质,发现电极表面的黏结剂可完全碳化,且活性炭上带有大量含氧官能团;利用电化学工作站采用循环伏安法对电极进行了测试,表明电吸附是一稳定而又可逆的过程,电极电流的最大值由碳化前的0.019 8A升至碳化后的0.042 7A,双电层电容提高到碳化前的2.16倍;对NaCl的电吸附实验表明碳化后电极的电吸附率是碳化前的1.59倍,活性炭的吸附容量也由1.14mg/g提高到3.29mg/g,且活性炭电极具有良好的重复利用性。     

Community cohesion after a natural disaster: insights from a Carlisle flood

This project analysed changes in community cohesion following a natural disaster. Data were collected from a flood‐affected community using a questionnaire survey. Analyses revealed that community cohesion was not predicted by the length of residence, or any other demographic characteristic of residents, but rather by a sense of community, community cognition and the degree of community participation. Cohesion alteration was not uniform, but varied along levels of hazard severity (degree of flood invasion). Cohesion increased in line with hazard severity at the initial flood stage, as residents recognised the importance of community unity and came together to cope with their losses. When the severity increased, residents transferred their focus to individual interests, which resulted in decreased cohesion. This project distinguishes itself in examining community cohesion in the wake of a natural disaster in the real world. Implications regarding community reconstruction and suggestions for hazard researchers are discussed accordingly.     

The influence of sampling protocol on nonmethane hydrocarbon mixing ratios

The effect of sampling protocol on ambient air hydrocarbon mixing ratios was examined on eight sampling days in Los Angeles during 2007 and 2008. Four protocols, which were based on previously published multi-city urban hydrocarbon studies in the United States, were compared and differences were quantified. Whole air canister samples were collected and analyzed for nonmethane hydrocarbons (NMHCs). Differing sampling protocols resulted in large differences in mixing ratios, up to an order of magnitude, for certain NMHCs on the same sampling day. However, the magnitude of the variability between NMHC levels obtained by the four protocols was not consistent throughout the eight sampling days. It was found that sampling time, followed by sampling location, had the greatest influence on the magnitude of the mixing ratio. Ratios between hydrocarbons, often used in urban studies to gain information on emission sources, also varied depending on the protocol used. Comparison of absolute NMHC mixing ratios collected in urban environments using differing sampling protocols should be made with care.     

Decomposition of Gas Phase 1,3-Butadiene by Ultraviolet/Ozone Process

Abstract

A pilot-scale plug-flow reactor was built to investigate its performance in treating airborne 1,3-butadiene (BD) via ozonation (O₃) and ultraviolet (UV)/O₃ technologies. Governing factors, such as the initial molar ratio of ozone to BD, UV volumetric electric input power, and moisture content in the influent airstream, were investigated. Experiments were conducted at an influent BD concentration of ～50 ppm, an ambient temperature of 26 °C, and a gas retention time of 85 sec. Results show that an initial molar ratio of ozone to BD of 3.5 and 2 sufficed to obtain BD decompositions of >90% for ozonation and UV/O₃, respectively. The UV irradiance did not directly promote the decomposition of BD, rather, it played a role in promoting the production of secondary oxidants, such as hydroxyl radicals. Kinetic analyses indicate that both types of BD decomposition are peudo–first-order with respect to BD concentrations. Moisture content (relative humidity = 40–99%) and UV volumetric electric input power (0.147 and 0.294 W/L) are both factors that weakly affect the rate of BD decomposition. Economic evaluation factors, including both energy of ozone production and UV electric input power, were also estimated.     

PAFC对水体中持久性有机污染物PFOA的混凝效果

针对含全氟辛酸(PFOA)的工业废水及应对PFOA的污染突发事件,采用PAFC及其复配粘土矿物凹凸棒和沸石进行混凝实验,并对几个影响因素进行了考察。结果表明,在PAFC的最佳投加量10 mg/L时,PFOA和浊度的去除率分别达到70.25%和99.42%,PAFC混凝处理PFOA的效果优于PAC;pH值对PAFC去除PFOA有一定的影响,当pH大于6时有利于PFOA的去除;PFOA和浊度的去除率随原始浊度的增加而增加;活性炭、盐酸改性凹凸棒、盐酸改性沸石、CT-MAB改性的沸石复配PAFC均可提高PFOA的去除率;改性处理后的沸石应用于PFOA的处理中,有望降低处理成本。     

Remediation of Soil Contaminated with Pyrene Using Ground Nanoscale Zero-Valent Iron

Abstract

The sites contaminated with recalcitrant polycyclic aromatic hydrocarbons (PAHs) are serious environmental problems ubiquitously. Some PAHs have proven to be carcinogenic and hazardous. Therefore, the innovative PAH in situ remediation technologies have to be developed instantaneously. Recently, the nanoscale zero-va-lent iron (ZVI) particles have been successfully applied for dechlorination of organic pollutants in water, yet little research has investigated for the soil remediation so far. The objective in this work was to take advantage of nanoscale ZVI particles to remove PAHs in soil. The experimental factors such as reaction time, particle diameter and iron dosage and surface area were considered and optimized. From the results, both microscale and nanoscale ZVI were capable to remove the target compound. The higher removal efficiencies of nanoscale ZVI particles were obtained because the specific surface areas were about several dozens larger than that of commercially microscale ZVI particles. The optimal parameters were observed as 0.2 g iron/2 mL water in 60 min and 150 rpm by nanoscale ZVI. Additionally, the results proved that nanoscale ZVI particles are a promising technology for soil remediation and are encouraged in the near future environmental applications. Additionally, the empirical equation developed for pyrene removal efficiency provided the good explanation of reaction behavior. Ultimately, the calculated values by this equation were in a good agreement with the experimental data.     

Improving the activity of Mn/TiO2 catalysts through control of the pH and valence state of Mn during their preparation

In this study, the authors investigated the influence of the valence state of Mn on the efficacy of selective catalytic reduction using a Mn-based catalyst. The nitrogen oxides (NOx) conversion rate of the catalyst was found to be dependent on the type of TiO2 support employed and on the temperature, as the catalyst showed an excellent conversion of > 80% at a space velocity of 60,000 hr(-1) when the temperature was above 200 degrees C. Brunauer-Emmett-Teller, X-ray diffraction, and X-ray photoelectron spectroscopy analyses confirmed that catalyst displaying the highest activity contained the Mn4+ species and that its valence state was highly dependent on the pH during the catalyst preparation.